Description
Update your vintage 2-switch GE low voltage light plate unit with these Touchplate four-button control units for a fresh new look. These units are designed with two pairs of buttons that correspond to the two directions on the vintage GE mini rockers or square pushbutton switches – one button/one direction was ON, the other button/direction was OFF. Choose from white, almond, black, or ivory for a stylish solution to refresh your existing low voltage set-up. Each switch station has two pairs of 1/2″ square button caps.
Features
- this 4-button unit is an alternative solution to replace a unit with two GE low voltage switches
- replaces two RS237, RS232, RS239, RTS6, RFS, etc. switches in GE, Bryant, Remcon and Sierra systems
- 2 wire switches easily adapted to a 3-wire system by doubling the number of buttons with pairs of ON/OFF buttons
- “ON” & “OFF” ARE NOT PRINTED ON SWITCH – order replacement engraved ON/OFF buttons separately if needed
- unit may be installed vertically or horizontally depending upon orientation of the box
- switches may be wired as left ON/right OFF or top ON/bottom OFF as preferred
- 1 amp @ 28 volts switch contact rating
- 4 momentary contact switches; dry contact
- free 3 wire to 2 wire low voltage conversion guide to make installation easy
- both relays connected to switch must be the same brand
- 4-1/2″ x 2-3/4″ plastic screwless light switch plate
- 2″ x 1-9/16″ switch opening holes
- 3-9/32″ screw hole spacing in metal bracket
- back depth is 5/8″; overall depth is 15/16″ from front of button to back of terminal bar
- two 1″ mounting screws
- made in USA
- cannot be used side by side in a 2-gang box: instead order a Classic 8-button control station to replace 4 GE switches on a 2-gang box.
- note: The metal flanges on the cover post holes on vintage units are designed to be pinched with pliers to make a tighter fit to hold the covers on.
Click Low Voltage Replacement Devices for relays and more switch options.
Reviews
There are no reviews yet.