Description
Falcon Lock RX-MEL-25C-L-DT-DAN-US26D-36X96-RHR Motorized Exit Device, CVR Concealed Vertical Rod, Satin Chrome, 24VDC
Falcon Lock RX-MEL-25C-L-DT-DAN-US26D-36X96-RHR KIT offers an advanced and energy-efficient solution for security in multifamily and commercial buildings. This motorized electric latch retraction (MEL) device simplifies access control by enabling electronic control of exit devices, enhancing convenience while maintaining mechanical egress at all times.Designed for versatility, this device can be integrated with credential readers, allowing authorized users to unlatch doors momentarily or engage extended access for free entry. The modular design facilitates easy installation of the MEL conversion kit onto existing Falcon 24 or 25 Series exit devices. With a robust 24VDC, 1 Amp power requirement, it’s compatible with standard Schlage power supplies, streamlining your power management. The RX-MEL-25C features a vandal-resistant design that detects tampering, while onboard diagnostics simplify troubleshooting and installation. This exit device is also equipped with a self-calibrating motor assembly, ensuring reliable performance. The satin chrome finish (626/US26D) offers an elegant look that complements any setting. Whether you’re upgrading existing systems or installing new ones, the Falcon Lock RX-MEL-25C-L-DT-DAN-US26D-36X96-RHR KIT is an ideal choice for enhancing security and convenience in your facilities.
KIT – Request to Exit, Motorized Electric Latch Retraction, CVR Concealed Vertical Rod Exit Device, Escutcheon x Dane Lever Dummy Trim 510L-DT, 36in x 96in, RHR Right Hand Reverse/Reversible, 24VDC1 Amp, Grade 1, 626/US26D Satin Chrome
Notice: The info below is not item specific.
Motorized electric latch retraction (MEL) provides energy efficient electronic control of an exit device for an affordable around the door solution. The MEL option is Falcon’s solution of choice for multifamily and commercial real estate facilities where cost competitive electromechanical latch retraction is desired. It is available on most Falcon 24 and 25 Series exit devices (not available for mortise 25-M or F-25-M). These devices always provide mechanical egress. Motorized electric latch retraction can be used with credential readers to unlatch doors momentarily for authorized users, or it can be incorporated with systems to retract latches for extended periods of time to allow free entry. This is a convenient alternative to mechanical dogging. Doors with automatic operators also may use exit devices with electric latch retraction.
Features:
- MEL option available on 24 and 25 Series exit devices, except 25-M (mortise)
- Energy efficient motorized latch retraction enables longer wire runs and the use of a standard Schlage power supply with option board
- Modular design allows for a simplified installation of the available MEL Conversion kit to existing mechanical Falcon 24 or 25 exit devices
- On-board installation and troubleshooting diagnostics built into the motor assembly
- Self-calibrating motor assembly
- Push bar is pulled in electronically when dogged
- Vandal resistant – detects and responds to events of attack and tampering
Requirements:
- The MEL has a low inrush current = 1.0 amps, so it can be used with standard Schlage power supplies. When powering multiple components, verify that the amperage requirement of all components combined does not exceed the power supply output rating.
- The MEL device is compatible with the following equipment: PS900 Series power supplies – PS902, 904, 906, 914; 900 Series Option Boards – 900-2RS, 900-4R and 900-4RL
- A power transfer (EPT, electrified hinge, or door loop) is required and sold separately
- Security monitoring (DM, LM, RX)
- Fail Safe/Fail Secure electric trim (FSA/FSE)
Compatible Options:
- Security monitoring (DM, LM, RX)
- Fail Safe/Fail Secure electric trim (FSA/FSE)
EPT Options:
- EPT-2: Two 18AWG wires with a max rating of 24VDC, 5A or 120 VAC NEC class 3
- EPT-10: Ten 24AWG wires with a max rating of 24VDC, 1A
Stock Sizes:
| Device | Door Size | Door Strike | Min Door Opening Width (Add 3.5″ to standard) |
|---|---|---|---|
| MEL-24-R | 3′ | 299 | 2′ 11″ |
| MEL-24-R | 3’ | 264 | 2′ 10 7⁄8″ |
| MEL-24-R | 3’ | 1439 | 2′ 10 1⁄4″ |
| MEL-24-R | 3’ | 1606 | 2′ 10 5⁄8″ |
| MEL-24-R | 4′ | 299 | 3′ 5″ |
| MEL-24-R | 4′ | 264 | 3′ 4 7⁄8″ |
| MEL-24-R | 4′ | 1439 | 3′ 4 1⁄4″ |
| MEL-24-R | 4′ | 1606 | 3′ 4 5⁄8″ |
| MEL-24-C | 3’ | All | 2′ 10 5⁄8″ |
| MEL-24-C | 4’ | All | 3′ 4 5⁄8″ |
| MEL-24-V | 3’ | All | 2′ 10 5⁄8″ |
| MEL-24-V | 4’ | All | 3′ 4 5⁄8″ |
| MEL-25-R | 3’ | 299 | 2′ 11″ |
| MEL-25-R | 3’ | 264 | 2′ 10 7⁄8″ |
| MEL-25-R | 3’ | 1439 | 2′ 10 1⁄4″ |
| MEL-25-R | 3’ | 1606 | 2′ 10 5⁄8″ |
| MEL-25-R | 4’ | 299 | 3′ 5″ |
| MEL-25-R | 4’ | 264 | 3′ 4 7⁄8″ |
| MEL-25-R | 4’ | 1439 | 3′ 4 1⁄4″ |
| MEL-25-R | 4’ | 1606 | 3′ 4 5⁄8″ |
| MEL-25-C | 3′ | All | 2′ 10 5⁄8″ |
| MEL-25-C | 4’ | All | 3′ 4 5⁄8″ |
| MEL-25-V | 3’ | All | 2′ 10 5⁄8″ |
| MEL-25-V | 4’ | All | 3′ 4 5⁄8″ |
Finishes:
- 605/US3 – Brass, Bright
- 606/US4 – Brass, Satin
- 613/US10B – Bronze, Oil Rubbed
- 619/US15 – Nickel, Satin
- 622/US19 – Black, Matte
- 625/US26 – Chromium, Bright
- 626/US26D – Chromium, Satin
- 629/US32 – Satinless Steel, Bright
- 630/US32D – Satinless Steel, Satin
- 643e/US11 – Bronze, Aged
Attributes
Ship via: No UPS – Common Carrier Only
Alternate Codes: FALRX-MELK-25C-L-DT-DAN-US26D-36X96-RHR, RX-MEL-25C-L-DT-DAN-US26D-36X96-RHR, RXMEL25CLDTDANUS26D36X96RHR, RX-MELK-25C-L-DT-DAN-US26D-36X96-RHR, RXMELK25CLDTDANUS26D36X96RHR
Category: Electrified Panic Devices, Panic Devices & Exit Alarms
Shipping Limitations: Some products exceed standard small package size regulations and may incur additional fees. Items measuring 84″ or more could require extra charges or LTL shipping. Please keep this in mind when ordering, and contact customer service for more details.
Reviews
There are no reviews yet.