Description
Hafele 003.15.102 Titebond Cold Press Veneer Glue
Hafele 003.15.102 Titebond, Cold Press Veneer Glue is an exceptional choice for large-scale veneer applications, providing a high-quality and economical alternative to traditional contact cement. This versatile adhesive is specifically designed for cold press laminating of wood to a variety of porous materials, including solid woods, particleboard, MDF, and plywood.With a moderate speed of set and a translucent glue line, Titebond Cold Press ensures a clean and professional finish while preventing bleed-through on open-grained and unbacked wood veneers. Safe to use, it contains no harmful or corrosive fumes, making it more user-friendly compared to many contact cements.Application is straightforward, with an open assembly time of 15 minutes at 70°F and 50% relative humidity, and total assembly time ranging from 15 to 20 minutes. For optimal results, a mechanical spreader is recommended to achieve consistent coverage, with a minimum spread of approximately 6 mils or 250 square feet per gallon. Keep in mind that Titebond Cold Press is not suitable for exterior use or in moisture-prone areas. It performs best when applied above 50°F, and agitation may be required if the product has thickened due to temperature fluctuations. Always stir before use to ensure uniformity and maintain its effectiveness.
Titebond, Cold Press Veneer Glue
5 gallon
Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials. Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers. Economical alternative to contact cement Formulated to minimize “bleed-through” Moderate speed of set No harmful vaporsSafe – nonflammable
APPLICATION GUIDELINES Application temperature: Above 50°F Open assembly time: 15 minutes (70°F/50°F RH) Total assembly time: 15-20 minutes (70°F/50°F RH) Minimum required spread: Approximately 6 mils or 250 square feet per gallon Methods of application: For most consistent coverage a mechanical spreader is recommended. Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess. LIMITATIONS Titebond Cold Press for Veneer is specifically designed for veneering and not suited for other types of assembly applications. Not recommended for exterior use or where moisture is likely. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before using. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY KEEP FROM FREEZING.
Attributes
Capacity: 5 gallon
Resources
- TCH_Furniture_Cabinetry_Hardware_ 2022 | Page 12.59
- Technical data sheet
- Titebond Cold Press Glue Specifications
Reviews
There are no reviews yet.